At the first week on March, QGMA machinery has deliveried a set of hook type shot blasting machine to South Africa. The customer is the wheel repair workshop. This hook type shot blasting machine is the second machine bought back by the customer. In terms of cleaning wheels, the hook type shot blasting machine efficiency is higher than the rotary table shot blasting machine.
QGMA made the blasting chamber of the hook type shot blasting machine is welded by 5MM thick steel plate and the guide plate of the shot blasting turbines is installed with 10MM steel plate. All the indoors are protected by wear-resistant cast iron guard plates. Grinding alloy cast iron protection, durable and wear-resistant, hook type shot blasting machine adopts rotary arm centrifugal shot blasting machine, with large shot blasting capacity, good shot beam diffusion, obvious cleaning effect and no dead corners.
When using the hook shot blasting machine, operators should also pay attention to some matters. The power used should not exceed the power of the shot blasting machine. It is also necessary to design a more suitable hanging tool according to the size and shape of the workpiece. Only in this way can it be fully give full play to the function of the shot blasting machine and at the same time reduce the impact and wear of the workpiece on the shot blasting machine. Once abnormal noise is found during use, the machine should be shut down immediately to check whether the shot blasting machine has malfunctions. Once found, people should repair or replace it in time.
How to safe operation of hook type shot blasting machine?
- The hook type shot blasting machine must be operated when the hanging rail is connected smoothly.
- Adjusting the time relay must ensure that the power supply is off.
- The performance of the hook type shot blasting machine must be kept in mind, and the operator must be a professional, non-professionals are not allowed to use the equipment by themselves.
- Professionals must carefully check all parts of the equipment before starting work to make sure that each part is in the correct position, and we must do a good job of refueling and lubricating each lubrication point.
- Before the hook type shot blasting machine is turned on, the shot supply system cannot be turned on.
- When the machine is working, we should keep a certain distance from the front and two sides of the machine to avoid the situation that the iron pellets of the hook type shot blasting machine fly out and hurt people.
- The staff must clean the case of the hook shot blasting machine and the surrounding area when they leave work every day, and remember to turn off the power and lock the electric control cabinet before leaving.
- Every weekend, the dust in the dust collector should be cleaned to keep the dust collector clean.
If you also need this kind of machine or you do not know how to choose the suitable shot blasting machine, please feel free to contact me. Our engineering team will give you the most suitable solution with competitive price.