How to purchase the shot blasting machine

How to purchase the shot blasting machine

For the details of the precautions for purchasing a set of shot blasting machine, QGMA shot blasting machine manufacturer lists the five steps in detail for your reference. Everyone knows that buying a shot blasting machine is like buying a car. If you can’t buy what you like, you will be very entangled. I will summarize it for you today.

Now please follow me to know how to purchase the shot blasting machine.

The first step: When we purchase a set of shot blasting machine, firstly we must make a large-scale inquiry to see what prices each company is and what are the differences.

The second step: After the inquiry, select the top five companies among them, and look at their certification information from these five companies.

The third step: Then go to their local customers to inspect the use of the equipment on the spot.

How to purchase the shot blasting machine 1

The fourth step: After purchase the machine,Check whether the parts of the shot blasting machine are firmly and securely connected; lubricate the areas where they should be lubricated according to the manual of the shot blasting machine; test drive without any abrasive for 2 to 3 hours. If no problems are found in the above steps, open the bucket elevator and screw conveyor, and add about 600Kg of new shot blasting machine abrasive into the equipment from the door of the blasting chamber. These shot blasting machine abrasives are conveyed by the screw conveyor and lifted by the elevator, and finally stored in the hopper at the lower part of the separator. After start to working, these shot blasting machine abrasives will flow into the blast turbines of the shot blasting machine through the electric abrasive dosing valve at the lower part of the hopper, and the workpieces to be cleaned in the blast chamber will be shot blasted.

Step 5: When adjusting the blast turbine, pay attention to the position of the control cage of the blast turbine so that all the steel shots of the shot blasting machine are covered on the workpiece to be cleaned, otherwise it will affect the cleaning efficiency. If necessary, apply black ink on a wooden board or lay a piece of thick paper, place it at the position of the workpiece to be cleaned, start the shot blasting device, and manually add a small amount of steel shots into the blasting tube of the shot blasting machine, and check the position of the projecting belt. If the position of the projecting zone of the shot blasting machine is not correct, adjust the directional sleeve to obtain the ideal position. After the control cage is adjusted, it can be tested under load, and after 30 minutes of shot blasting, 400kg projectiles can be added.

For QGMA, selling equipment to customer is not our ultimate goal. Making customer satisfied with the machine and bring profits to customer is our pursuit.

If you want to know more about the shot blasting machine , please no hesitate to contact us. Our engineering team will make the best solution for you.

How to purchase the shot blasting machine 2

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *