rubber belt shot blasting machine 6

How to change the Rubber apron for Tumble Belt Shot Blasting Machine?

What is Tumble Belt Shot Blasting Machine? Tumble belt shot blasting machine adopts the endless rubber apron to form a special barrel, to make the work pieces tumble continuously during shot blasting process .It is mainly used in forging work pieces and metal work pieces. Tumble belt shot blasting machine can be used not only […]

overhead rail shot blasting machine 5

Most practical shot blasting machine–overhead rail shot blasting machine

Overhead rail shot blasting machines can provide services in many different production areas, e.g. foundries and forges. Hanger type blast cleaning machines offer ideal conditions for effective and economical blast cleaning. The use of hangers allows for the reliable and economical blast cleaning of components, from small to very large workpieces. The machine can be easily and smoothly […]

Abrasive-Sandblasting

Sandblasting Rooms That Everyone Should Know About

There are lots of people who have heard about the term sand-blasting room and also are making use of sandblast resist products as giveaways to their events and other parties.

stone-shot-blasting-machine-1

Stone shot blasting machine assembly and testing photos at our workshop for our Turkey customers.

Near the Chinese New Year, the assembly and testing of a stone shot blasting machine has just been completed in our factory. This stone shot blasting machine is mainly equipped with the following configuration: 1. This stone shot blasting machine is equipped with 6 shot blasting machines, which are distributed around the blasting chamber, Which […]

blasting cabinet

All kind of sand blasting machine detailed introduction

Sand blasting machine are using to rust, corrosion removal, smooth the rough surfaces of metals and non metals. Sand blasting machine are using to clean or shape a surface using sand material known as abrasive which is propelled using high pressure typically through compressed air or blast wheel. Sand Blasting Machine are many types such as Portable Sand […]

blank

Which is better-sandblasting or shot blasting?

There is no right or wrong answer to the question of whether sandblasting or shot blasting is better. There are many variables involved in the abrasive blasting treatment business. The best method depends on the surface you’re treating and the type of finish you expect. Sandblasting is typically a smoother and less invasive abrasion process. […]

blank

Shot blasting & sandblasting: what is the difference?

Like many people, you might be confused about the difference between sandblasting and shot blasting. The two terms appear similar but sandblasting and shot blasting are actually separate processes both involved in the overall abrasive blasting business. The difference between sandblasting and grit blasting, as shot blasting is often called, is straightforward. It lies in […]

blank

What is abrasive blast cleaning?

Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants. A pressurized fluid, typically air, or a centrifugal wheel is used to propel the media. Abrasive blasting of steel substrates […]

blank

Shot blast cleaning method of aluminum casting surface

1、Characteristics of shot blasting cleaning process: After shot blast cleaning of aluminum die castings, the following effects can be achieved. High efficiency: The shot wheel can finish cleaning in a few minutes with the shot quantity of 110-260 kg / min and the shot velocity of 50-75 m / s. For large batch or large […]

blank

How to deal with the base surface to improve the adhesion of epoxy resin floor

Epoxy resin floor has been widely used in our life. The adhesion of epoxy resin floor is one of the important indexes to guarantee the service life of the floor. We want to improve the adhesion when we carry out the construction of epoxy resin floor, so how should we improve the adhesion of our […]