Put the blocks on the loading roller conveyor and start the machine. The paver block enter into the blasting chamber by the roller. Turn on the blast turbines. The steel shot projectile on the block surface uniformly. After blasting, the paver block move out from the other side and the blowing device will blowing the steel shot fall into the screw conveyor. The steel shot will through the screw conveyor to bucket elevator and separator. Finally the cleaned steel shot will into the hopper to recycle to use.
The blast turbine produced by imported technology has good texture effect and high efficiency on the paver; the steel shot and paver block powder separation and purification system is good and the three-stage drum separator is used; the dust collector uses the internationally advanced pulse back blow bag dust collector for dust filtration in the stone industry; the electrical system adopts PLC control and manual control, which is convenient and simple to operate. The spoke conveying adopts frequency conversion speed control and the conveying speed can be set.
Blast turbine: It adopts the international advanced direct-connected blast turbines, the motor power can adjustment according to the working capacity, the speed is fast, the ejection force is strong and the ejection effect is good.
Separator: This machine adopts an advanced BE type full curtain separator. The separator is mainly composed of a sorting area, roller screen, conveying screw, abrasive hopper, pneumatic abrasive control valve, etc., which can completely separate crushed stones and steel shots. The separation efficiency reaches 99.9%.
