Rubber belt shot blasting machine delivery to Europe 1

Rubber belt shot blasting machine delivery to Europe

Recently QGMA Group has successfully delivery 4 sets rubber belt shot blasting machine to Europe.

Those machines with one 11 Kw wheel blast turbine, the diameter of desk is Φ1000, the max loading capacity is 600 Kg. Customer use this machine to clean the casting.

Rubber belt shot blasting machine delivery to Europe 2

Tumble belt shot blasting machine can blast 500kg workpieces at a time, and is mainly used for small pieces shot blasting. This machine uses a high-speed rotating impeller to throw the projectiles onto the continuously overturned workpiece in the drum to achieve the purpose of cleaning. It is suitable for sand removal, rust removal, descaling and surface strengthening of small castings, forgings, stamping parts, angle steel, channel steel, steel plate and steel plate bending parts, gears, springs, etc. in various industries, especially suitable for cleaning and strengthening the parts that are afraid of bumping.

A specified number of workpieces are added to the blasting room. After the machine is started, the workpieces are driven by the roller and begin to turn. At the same time, the projectile formed by the high-speed projectile thrown by the blasting device hits the surface of the workpiece evenly, so as to achieve the purpose of cleaning.

Rubber belt shot blasting machine delivery to Europe 3

The thrown steel shots particles flow into the steel mesh at the bottom through the small holes in the rubber track, and are sent to the elevator through the screw conveyor, and the elevator is lifted into the separator for separation.

The dust is sucked by the fan and sent to the dust collector to be filtered. The clean air is discharged into the atmosphere. The dust on the cloth bag is shaken and falls into the dust box at the bottom of the dust collector. The user can clean it regularly. The waste sand flows out from the waste pipe. Can be recycled. The shot-sand mixture is recycled into the chamber by the recycling pipe, and the clean shots enter the blasting turbine through the shot supply gate to throw the workpiece after the separator is separated.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *